| Model | KJT-TG20 | KJT-TG20C | KJT-TG20CL | KJT-TG50 | KJT-TG50C | KJT-TG50CL |
| Type | Cable type | M12 connector cable type | Cable type | M12 connector cable type |
| Detection distance | 10M
| 20M |
| Spot diameter | approx. 4 mm | variable (for use below ø40 mm) |
| light source | Red laser (660nm) |
| Mutual interference prevention function | 4 units (when using the interference prevention function) |
| Repeat accuracy | ±5mm |
| response frequency | 500Hz |
| I/O control output | NPN open collector/PNP open collector switching method 30 VDC or less, 50 mA or less, residual voltage 2 V or less N.O./N.C. switching method *3*4 |
| external input | Emission stop/tuning/reference plane update (when using DATUM mode) switching method Short circuit current NPN: 1 mA or less/PNP: 1 mA or less |
| Analog output |
| Current output/voltage output switching method Current output: 4 to 20 mA Maximum load resistance 500 Ω Voltage output: 0 to 10 V External load resistance 5 kΩ or more *3*4 |
| protect the circuit | Power reverse connection protection, power surge protection/output short circuit protection, output reverse connection protection, output surge protection |
| voltage | 20 to 30 VDC ripple (P-P) 10%, Class 2 or LPS |
| Current consumption | 45 mA or less (excluding load)*5 | 50 mA or less (excluding load)*7 |
| Shell protection level | IP65/ IP67 |
| ambient lighting | Incandescent/Daylight: Below 10,0000 lux |
| ambient temperature | -20 to +55 °C (no freezing) |
| Relative humidity | 35 to 85 % RH (non-condensation) |
| Earthquake resistance | 10 to 55 Hz, dual amplitude 1.5 mm, 2 hours each in X, Y, Z directions |
| Impact resistance | 10 to 55 Hz, dual amplitude 1.5 mm, 2 hours each in X, Y, Z directions |
| Material | Housing: zinc casting (nickel-chromium plated), indicator cover and push button: PES, PMMA with anti-scratch coating, cable gland |
| Housing: Zinc casting (nickel-chromium plated), Indicator cover and push button: PES, Lens cover and display: PMMA with anti-scratch coating, Cable bushing: PBT, Cable: PVC, |
| Housing: Zinc cast (nickel-chromium plated), Indicator cover and push button: PES, Lens cover and display: With anti-scratch coating |
| Housing: Zinc casting (nickel-chromium plated), Indicator cover and button: PES, Lens cover and display: PMMA with anti-scratch coating, Cable bushing: PBT, Cable: PVC, M12 Connector: TPE, PBT, nickel-plated brass |
