| Product Paramenters |
|
| application | Simple evaluation of rotational and linear motion underspeed; blocking |
| Switch function | The output switches during the start-up delay if (Factual) is greater than (Fpreset) |
| Electrical Design | AC/DC |
| Switching output | Normally open |
| Nominal voltage [V] | 20-250,AC/DC
|
| Current consumption [mA] | < 15 |
| Minimum load current [mA] | 10
|
| Reverse polarity protection | No |
| Rated current (continuous) [mA] | 350 AC (...50 °C) / 250 AC (...80 °C) / 100 DC |
| Rated current (peak) [mA] | Rated current (peak) [mA] 2200 |
| Voltage drop [V] | < 6.5 |
| Short circuit protection | NO |
| Overload protection | NO |
| Trigger sensing distance [mm] | 10 |
| Correction coefficient | Mild steel = 1 / Stainless steel approx. 0.7 / Brass approx. 0.5 / Aluminum approx. 0.4 / Copper approx. 0.3 |
| Setting range [pulses/minute] | 5...300 |
| Adjustment of switch point | Multiturn potentiometer |
| Hysteresis [% of Sp] | 10
|
| Start delay [s] | 15 |
| Damping frequency (maximum) [pulses/min] | 15000
|
| Ambient temperature [°C] | -25...80 |
| Protection | IP 67 |
| Average time TF [a] | 898 |
| Install | Can be mounted flush |
| Shell material | Brass special coating; PBT (Pocan) |
| Weight [kg] | 0.276 |
| Input pulse indicator | yellow |
| Output status indicator light | green |
| Connection | PVC cable / 2 m; 3 x 0.5 mm² |
