This browser does not support the video element.
KJT For the application environment of hydraulic transmission systems, the high-pressure resistant proximity switches provided can be used freely in high-pressure, high-temperature and harsh environments. Its shell adopts corrosion-resistant materials and special sealing methods. Depending on the requirements of the application location, various products suitable for high pressures of 0-500bar can be provided. As for the requirements of shell diameter, thread size, etc., our company can also customize and provide them according to the specific needs of users. The sensing and output amplification parts of this product are integrated. It can be effectively controlled directly by a relay without the need for an additional amplifier. The sensor has two ways to output signals: a fixed sealed cable or an M12 plug connector.
Technical parameter | |
Size | M14*56mm |
Mounting | Flush |
Sensing Distance SN [mm] | 3mm |
Sensing surface material | Ceramic/EP |
| Operating voltage | 10-36VDC |
| Withstand voltage value | 500bar |
Output | NPN/PNP/NO/NC |
Ripple | <10% |
No Load Current | >2.2mA(OFF) <1.1mA(ON) |
| Voltage Drop | <1.5V |
Switching Frequency | 1000Hz |
Response Time | 0.5ms |
Switching Hysteresis | <15%(Sr) |
Repeat Accuracy | <1%(Sr) |
| shell material | Stainless steel |
Protection Degree | IP67/IP69K |
Operating Temperature | -25℃-+70℃ |
Temperature Drift | <10%(Sr) |
| Short Circuit Protection | YES |
Overload Trip Point | 180mA |
| EMC | RFI>3V/m / EFT>1KV / ESD>4KV (contact) |
| Shock/vibration | IEC 60947-5-2,Part 7.4.1 / IEC 60947-5-2,Part 7.4.2 |
Connection | 2m,PVC cable |