The KJT magnetic switch cylinder is used to detect the position of the cylinder stroke, without the need for brackets at both ends of the stroke, making it easy to install, easy to use, and compact in structure. High reliability, long service life, low cost, and fast switching response time. Widely used in various mechanical equipment.
Multiple models available, suitable for various occasions;
The wires are made of oil resistant PVC material with a high level of protection.
| switching logic | Electronic contactless; Normally open type |
| Induction switch type | Contactless transistor NPN type |
| Operating voltage range | 5~30VDC |
| Maximum switching current | 200mA Max. |
| Maximum contact capacity | 6W Max. |
| Internal consumption current | 11mA Max.@24V |
| Residual pressure drop | 2.5V Max.@10mA DC |
| Leakage current | 0.01mA Max. |
| pilot lamp | RED LED |
| Cable | φ2.8，2C/Grey oil resistant PVC |
| Maximum switching frequency | 1000Hz |
| Operating temperature range | -10℃~70℃ |
| Impact resistance | 50G |
| Vibration resistance | 9G |
| Waterproof grade | lP67 |
| protection circuit | Power polarity reverse protection; Surge absorption protection |