YOUR GLOBAL AUTOMATION PARTNER

You are here: Home » Products » Photoelectric sensor » Slot type photoelectric sensor » ST676 EE-SX67 IP67 Waterproof ABS NPN PNP Photoelectric Proximity Sensor

Product Category

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

ST676 EE-SX67 IP67 Waterproof ABS NPN PNP Photoelectric Proximity Sensor

KJT inductive proximity sensors mainly for the detection of metal objects. These products are widely used in packaging and plastics machinery, production lines and conveying systems. They come in various forms, with digital (SCR, transistor) and analog outputs. The inductive proximity sensors have round housing size of 3mm to 30mm,shielded or unshielded form,lead wire or connector type are optional.
Size:
Availability:
Quantity:
  • ST676

  • KJTDQ

KJT slot-type photoelectric switch is actually a kind of through-beam photoelectric switch, also called U-shaped photoelectric switch. It is an infrared sensing photoelectric product, which is composed of an infrared transmitter tube and an infrared receiver tube. The slot width is It determines the strength of the induction receiving model and the distance of the received signal. Light is used as the medium, and the infrared light between the luminous body and the light receiving body is received and converted to detect the position of the object. The trough photoelectric switch is also non-contact like the proximity switch. It is less restricted by the detection object and has a long detection distance. It can detect long distances (tens of meters) with high detection accuracy and can detect small objects. The application is very wide.

1

Technical parameter

Model

ST Series (from ST670 to ST677)

Sensing distance(all series)

5mm (slot width)

Standard detection object

Opaque object 2x0.8mm

The difference distance 0.025mm
Output NPN/PNP/NO/NC
Light source (luminescencewave length) GaAs infrared light-emitting diode (940nm)
Indictor The light turns on (red) when the light is blocked
Power supply voltage DC5V--DC24V+10%,ripple (p-p)less than 10%
Static current consumption 20mA or less (NPN type)
KJT-ST676 control output When receiving light, the indicator light is on, and the NPN collector has no output.when the light isblocked, the indicator light is off, and the NPN collector open circuit outputs DC5V-24V.below 100mA, and the residual voltageis below 0.5V (when the load current is 100mA). Residual voltage 0.3V or less (whenload current is 40mA)
KJT-ST676 control output The light indicator light remains on, and the NPN collector has no output; when therotor is blocked,the indicator light is on, and the NPN collector open circuit outputs DC5V--24V, below100mA, and the residual voltage is below0.5V (when the load current is 100mA). Residual voltage 0.3V or less (when the loadcurrent is 40mA)
Automatic protection

Built-in polarity automatic protection circuit, the sensor itself will not be damaged when

connected incorrectly, but it will not work

Response frequency 1KHz--3kHz
Use environmentillumination light-receiving surface illumination fluorescent lamp: 1000 1x or less
Ambient temperature 25~ +55"C during operation: -30 - +80C during storage
Environmental humidityDuring operation 5~85%RH During storage: 5~ 95%RH
Response time < 3ms
Operating temperature -25°C-75°C

2


ST槽形传感器

ST系列2

3

ST系列接线图

ST系列接线图2

4

ST应用场景图






Previous: 
Next: 
 Tel: +86 18061257233
 Whatsapp: +86 18013047093
 Office Add: 9-101, Shenzhi Huigu, No. 777, Kening Road, Jiangning District, Nanjing City, Jiangsu Province, China
 South east Asia office: 48/14 Ratchadaphisek20, Huaikwang, BKK 10310.

Useful Links

Copryright © 2022 Nanjing KJT Electric Co., Ltd. All rights reserved. Support by Leadong | Sitemap.