KJT heavy-duty limit switch is a mechanical control switch, which is used for conveyor belt deviation prevention, crane over-roll protection, and rope pull switch. Taking advantage of its high reliability, it is widely used in steel equipment, large conveying machinery, loading and unloading machinery and cement equipment. Resistant to harsh environments. The glass sealed contacts are filled with inert gas and are not affected by the environment. Resistant to vibration, impact, and wide range of applications.
| Product Paramenters |
| model | TS 441-11Y |
| Principle of action | Mechanical |
| Shell raw materials | Gray cast iron, galvanized |
| Contact material | silver |
| gross weight | 1,245g |
| Normally closed quantity (NC) | 1 |
| Normally open quantity (NO) | 1 |
| B 10D normally closed contact (NC) | 2,000,000 operations |
| operating units | plunger |
| Mechanical life | 5,000,000 operations |
| Action angle | 20° |
| contact open circuit | 2×6mm |
| Minimum drive speed | 1mm/min |
| Maximum action speed | 1m/sec |
| Notice | Action speed: Driving speed of the vertical drive angle switching axis |
| Circuit connection | Screw connection M20 x 1.5 |
| Minimum cable cross-section | 1.5mm² |
| Maximum cable cross section | 2.5mm² |
| Notice | Cable part: including conductor ferrules |
| Wire cross section | 13AWG |
| length, width and height | 63mm*106mm*125mm |
| Plunger diameter | 10mm |
| Protection level | IP65 |
| ambient temperature | -30 ... +90°C |
| Rated insulation voltage | 400V |
| Rated impulse withstand voltage | 6kV |
| Thermal test current | 16A |
| Application category | AC-15: 250V/4A |
| switching element | Normally open contact, normally closed contact |
| Notice | Switching elements have double breakpoints |
| Switching principle | slow motion |
| Precautions | Actuating from the side of the plunger should be avoided as this will shorten the mechanical life of the position switch. |
