KJT photoelectric speed sensor is an angular displacement sensor, which consists of a gap disk installed on the measured axis, a light source, a photoelectric device and an indicating gap disk. It has the advantages of non-contact, high precision, high resolution, high reliability and fast response, and has been widely used in the field of detection and control. The application of photoelectric sensors in industry can be summarized into three basic forms: direct type, reflective type, and projection type.
Technical parameter |
Model | 50*50*17 mm
|
Diffuse Reflection | 30cm
| 1m
| 1m
|
Retro Reflection
| 50cm | 1.5m | 2m |
through beam | 70cm | 2m | 5m |
| Operating voltage | 12-24VDC |
| Light Source | Infrared Led(880nm) |
Output | PNP/NO/NC |
Consumption current | ≤25mA |
Response time | ≤8.2ms |
| Return difference | 5…20% |
| Voltage drop | ≤2.5V |
| Repeat accuracy | ≤3% |
| Output instructions | Yellow LED |
| Protection circuit | Surge, reverse polarity, short circuit protection |
| Operating temperature | -15°C- 55°C |
| Environment humidity | 35 to 95% RH |
| Shell material | PC/ABS |
| Wiring | 2M PVC cable |
| Protection level | IP65 |
