KJT label sensor adopts an optimized thin shell and deep groove design; fast response time: 50ms; dynamic learning through the control panel and fine-tuning with +/- buttons; light/dark function; NPN&PNP integrated output Function; metal shell, protection grade IP65; output can be switched during self-learning, connector type or cable type with multiple connection methods.
● Adopt optimized thin shell and deep groove design
● Fast response time: 50ms
● Dynamic learning via control panel, fine-tuning with +/- keys
●Light/dark function
● NPN&PNP integrated output function
● Metal shell, protection grade IP65
● Connector type or cable type that can switch output and multiple connection methods during self-learning
Technical parameter
|
working principle | Optical principles |
Dimensions (width x height x depth) | 10MM x 25MM x 64.3MM |
Groove width | 3MM |
Housing shape (beam exit) | 42MM |
Type
| Label Gap Sensor |
tag identification | yes |
Minimum detectable object (MDO) | Spacing between labels/label size: 2MM (depends on the thickness of the label |
light source | LED infrared |
switch function | Light/dark switch is adjusted by button |
set up | plus/minus button |
Teaching function program | 2 teaching contacts teaching function program (dynamic) |
Switching output | NPN/PNP |
On-off level | 10 KHZ (when the light-dark contrast ratio is 1:1) |
Response time | 50MS (signal transmission time (when the battery is loaded) |
Switching output (voltage) | PNP: high level = UV-s2V/low level = about 0V |
Switch type | Light/dark switching |
Connection Type | Plug, M8, 4-pin/conductor |
